Skip to main content

Paul

Maintenance

Before/ During/ After

Before every training

NOTE

Put a few drops of the silicone oil provided in both nostrils and in Paul‘s mouth before each training session. Intubate Paul several times before each training session using a tube moistened with the care oil supplied.

Paul_silicon_oil_add.png

By doing this, the airway is maintained and retain its elasticity. The silicone oil does not need to be removed from the airway after training.

CAUTION

  • Only use the silicone oil supplied with this simulator.

  • Not using the oil for intubation or using a product non-approved by Laerdal may damage the airway.

After every training

The simulator is splash-proof but not waterproof. If Paul gets wet during training, dry it thoroughly with a dry cloth. Then clean Paul with a water-based baby wipes and put it back in the sleeping bag provided. To protect the head and hair, put its hat back on.

NOTE

  • At the end of each training session, please make sure that Paul has completely shut down. The light on Paul’s stomach should switch off completely.

  • If the LED on the belly is still lit and after switching off the computer or router, users can switch Paul off manually by stroking its head several times with the magnet provided.