Removing the pelvis skin
Before starting, make sure that:
The abdomen is open,
and both the uterus and baby are removed.
NOTE
Make sure there is no fluid accumulated in the simulator under the skin. Use a paper towel to clean the area.
Pull up the leg latches on both sides of the pelvis and remove the legs.
Remove the two thumb screws holding the perineum retention ring.
Remove the retention ring.
Remove the eight plugs holding the pelvis skin.
Detach the fluid valve located behind the urethra.
Unzip the pelvis skin from the simulator.
Lift the pelvis and detach the perineum from the simulator.