Skip to main content

SimMan Critical Care

Install thigh IM pads and skin

SM_Trauma_Thigh_IM_Install.svg

  1. The dorsal side of each IM thigh skin is marked by either an “L” or “R”. This marking should be aligned with the corresponding “L” or “R” on the upper dorsal thigh of the simulator’s.

  2. Apply a liberal amount of baby powder to the inside of the skin and leg and pull the skin all the way up until it is even with the top of the leg skin.

  3. Fold the skin half way down and carefully insert the foam IM pad underneath the skin. The foam IM pad could tear if mishandled.

  4. The foam IM Pad should sit 1” (2.5 cm) from the top edge of the leg. Replace the skin.