Attach left leg
Note
Depending on the model, attaching the leg is done differently.
Align the left leg bolt and cables with the pelvis socket.
Feed the leg bolt and cables through the socket and into the torso. Do not pull the leg by the cables.
Carefully push the leg in towards the pelvis to form a snug fit.
Connect the cables.
Put the stomach foam back into place.
Follow the procedure on how to Close the torso skin.
Attach left leg (old attachment setup)
Align the left leg with the pelvis
Feed the leg and cables through the socket then fasten the screw cap around the cables and twist into place.
Carefully push the leg in towards the pelvis to form a snug fit.
Connect the cables
Put the stomach foam back into place.